Stop running and stumbling – take care of your back and legs, the wheels spin and run faster than your legs!

Introducing the sturdy, lightweight, and versatile “Solo Standard” mini-trike for your favorite paramotor. The trike’s body is crafted from durable duralumin alloy. The wheel axles are a combination of steel and aluminum tubing. The trike’s wheels feature 20mm diameter axles and two ball bearings.

Almost all types of paramotor frames (chassis) can be installed on the DTpropeller “Solo Standard” trike:-

Parajet-Maverick, Maverick 2, Cadet, Cadet 2, Mav Max; Adventure Pluma; Kangook; Macfly; Airconception; Scout Carbon; R Ultralight T Rex; Pap; Flattop; OpenPPG; Fly Products; Simplify-ppg; Nimbus; Power2Fly; Yooda; Miniplane; HsCOM; REBEL 2RS; SkyMax; SkyRunner; Liberty; Bailey; BlackHawk; Fresh Breeze; WalkerJet; HE Daytona; Wasp; Minimot.

If you haven’t found the frame (chassis) of the paramotor you’re interested in in this list, please contact us. We’ll agree on the type of mounts and manufacture a mount for your frame (chassis).

The Solo Standard version of the trike does not include: a front carbon mudguard, a mirror for observing the paraglider and evening LED signal beacons.

Reviews and Video Reports:

Read reviews of DTpropeller trikes on our website. Watch video reviews of DTpropeller trikes from our customers at the following YouTube links:

https://www.youtube.com/watch?v=_pDpON3Qamo

https://www.youtube.com/watch?v=USjMpawusnM

https://youtu.be/OGsbo1SXXrQ

Transforming a trike into another trike model:

All trike parts are interchangeable. If a customer purchases one of the DTpropeller trike models, they can purchase additional parts from us to convert their trike into a different configuration (from a single-seat trike to a two-seat trike, or vice versa; swap wide wheels for 20-inch ones, or vice versa; install wheels for sand and soft terrain, or vice versa). Thus, our trike, like a LEGO set, allows the owner to independently transform their trike to suit any purpose.

Important trike settings for installing a paramotor with a frame (chassis) from any manufacturer on a trike:

Watch a video of trike adjustments for all paramotor frame (chassis) designs at the YouTube link:      https://youtu.be/kAvElheOrME

The recommended propeller tilt angle is 3-7 degrees.

You can install any paramotor you fly on your back on a DTpropeller trike, allowing you to adjust the trike to your personal preferences. Motor tilt adjustment is especially important on a trike. This adjustment controls the propeller thrust vector during takeoff. Proper thrust vectoring helps the paraglider deploy correctly and quickly, making takeoff easier and safer.

With the propeller thrust vector correctly set, the airflow from the propeller will be directed upward over the wing during takeoff. During takeoff, the airflow from the propeller begins to propel the trike forward, pulling the wing along with it. At the same time, the wing, driven by the trike’s movement, is caught in the airflow from the propeller, which then picks up the wing and lifts it upward. Just remember that before takeoff, the pilot must find the correct wind direction and properly position the wing behind the trike.

Specifications:

Weight – 12 kg.

Width – 1650 mm.

Length – 1600 mm.

Ground clearance – 210 mm.

Wheel diameter – 300 mm.

Wheel width – 100 mm.

The wheel has two ball bearings for an axle diameter of 20 mm.

Maximum pilot weight is 100 kg + 50kg

If you have any questions about the trike or about ordering a trike, please email us at office@dtpropeller.com